A stone patio is always a beautiful feature that adds value to your property and turns outdoor spaces into relaxing, friendly environments. You can create an outdoor patio on your own, or you could rely on professional services provided by a respectable local landscaper.

Either way, you should find out more about some of the most important steps involved by this project. Here is some helpful info on how to cut patio stone.

Cut the Stones Using a Circular Saw

This is, by far, the simplest way to cut patio stone. While multi-purpose saws may be ineffective when it comes to sectioning thick stones, a circular saw would enable you to finish this job in no time, with minimal effort. To obtain the desirable results, follow these simple guidelines

1)    Place the stone that you want to cut in the right position, on a flat surface.

2)    Use a pencil to mark the trajectory of the cut.

3)    Leave the stone in a bucket filled with clean water for a few seconds, to eliminate dust that may bother you during the cutting phase.

4)    Remove the stone from the bucket, place it on the ground, activate the circular saw, and start cutting.

5)    Turn the stone upside down. Following the trajectory imprinted on the underside of the stone, and run the blade through the stone.

6)    Eliminate all imperfections with a maul or a mini-sledgehammer. Once you obtain a perfectly shaped stone that can be installed in your patio, you can consider the job done.

Ask for Help

Need to cut patio stone? Always remember that you have to wear gloves and safety glasses throughout the entire process. If you don’t have the skills, the tools, or the patience to complete this DIY project on your own, hire a competent landscaper to do the heavy lifting. Find the best ones in your area with Seva Call, a free service introduced to help you find great specialists in no time.