Installing In Line Water Filters

Installing In Line Water Filters - Plumbers

There are various uses of in line water filters, but they are mostly used to filter water for refrigerators and ice-making machines. These systems are known to reduce bad smells and tastes from water, although they don’t work quite as well in removing certain rotten-egg odors from water.

Typically, they are also used to lessen the chlorine taste of water as well as reduce the presence of lead and organic chemical substances. However, in line water filters are not designed to turn biologically unsafe water safe to drink.

The filter canisters used for in line water filters contain activated carbon, which can be quickly used up. As for their assembly, most of these systems consist of ¼ inch fitting that allows users to quickly connect their ¼-inch water lines straight into the filter’s inlet and outlet without having to use any other fittings.

These fittings, also known as push-to-connect or push-lock, allow quick and easy installation of water lines with lesser likelihood of a leak.

Steps to Install In Line Water Filters

1. Determine where the system will be located. The ideal location is where it can be connected to your home’s cold water pipe, which is usually placed under the kitchen sink.

2. Shut off the supply of cold water to your home. Detach a piece of the cold water supply pipe about 3 inches wide. Use pipe cutters to remove a section and create a gap between the faucet and the water supply valve.

3. In the gap you just made, insert the in line water filter. The water supply should connect to the inlet on the filter located above the sump while the kitchen faucet should connect with the filter’s outlet.

4. Use the filter’s mounting kit and follow the instructions there to mount the filter properly. Use the bracket that came with the kit to mount the unit onto the cabinet’s wall. Drill out pilot holes on the wall into which you will screw in the filter using the provided screws. Make sure to allow some space for future maintenance work so you can access the filter easily or unscrew the sump.

5. With the filter installed, turn on the cold water supply. Run the system for a few minutes to let water flush through it. Check for leaks.

Need Help Installing In Line Water Filters?

You may not have the right tools to do this job, or perhaps you just want to ensure proper installation. Whenever you require the help of a service professional, use Seva Call to find one quickly and conveniently. Our service is free and we can connect you to reliable plumbers in just a few minutes!

Tags:


Leave a Reply

Your email address will not be published. Required fields are marked *